Air Activated Switch

Air Activated Switch

Share
Our Price £69.38
Reward Points 346
Quantity

Manufacturer Tynetec

Description

The Air Activated switch can be used in wet areas such as swimming pools or Jacuzzi's. The actuator pad is connected via PVC tubing to a wall mounted switch plate. An alarm call is made by simply squeezing the pad once.

Features

  • Flexible PVC actuator pad with 2 metre long PVC tubing
  • Free standing or fixed (mounting plate supplied)
  • Actuator pad dimensions: 93mm diameter x 16mm deep
  • Air switch housed in surface mount single gang pattress
  • SPDT clean contact switch output
  • Air Activated Switch Part No. ZCS955 (includes actuator pad)
  • Compatible with SayPhone, Advent xt & Altec Response
  • Use with the Boxed Transmitter Module for radio applications

Related Products...

Bed Sensor

The Bed Sensor should be positioned across the width of the bed between the mattress and the base. Monitoring periods are set on the Sensor Controller. If the person gets into bed, then gets out again and does not return within the preset time an alarm call will be transmitted. A bedside lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-bed" and "out-of-bed" activity is transmitted and logged.

Features include

  • Bed sensor dimensions: 650 x 130 mm
  • 2 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per bed
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-bed timeout options
  • Bed Sensor Part No. ZCS844
  • Compatible with Tynetec Sensor Controller

£279.02

Strobe Light

A flashing Strobe Light is used to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

  • Wall mounted enclosure: 110mm diameter x 70mm deep
  • 50mm diameter blue strobe light
  • Triggered automatically by a call to an Advent xt intercom
  • Flash duration: 20 seconds
  • Advent xt Strobe Light Part No. ZSL045
  • Compatible with Advent xt systems only

£63.06

Wander Alarm

The Keypad should be wall mounted within the dwelling with the contacts wired to the door and the mains adapter plugged into a 13A socket. Before the Carer leaves they enter a code to start the exit time period. When the exit time period expires the door is armed. When the door is opened the entry time period starts. If the code is not entered within the entry time an alarm call will be transmitted.

Features include

  • Programmable 4 digit arm/disarm code
  • Programmable entry & exit times
  • Integral entry/exit sounder
  • Instant alarm zone option
  • Flip-cover & illuminated keypad
  • Test facility
  • Supplied with mains adapter & door contacts
  • 5 years transmitter battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 135 x 90 x 27 mm (HxWxD)
  • Wandering Alarm Part No. ZXT433
  • Compatible with SayPhone, Advent xt & Altec Response

Altec 169Mhz Heat Detector

Heat Detectors should be ceiling mounted in kitchens or areas with high levels of fumes or dust, they are not suitable for bathrooms or areas of high humidity. When activated a local alarm will sound and an alarm call will be transmitted. The Control Centre or Local Manager can speak with the resident and assess the risk before contacting the Emergency Services.

Features include

  • Fast responding Thermistor sensor
  • 85 dB sounder
  • Test Button and status LED indicator
  • 1 year battery life (typical) - user replaceable 9V PP3
  • Daily battery self test & low battery reporting
  • Dimensions: 120 x 135 x 55 mm (HxWxD)
  • Complies with BS 415: 1990
  • Heat Detector Part No. ZXT421
  • Compatible with SayPhone, Advent xt & Altec Response

£100.71

Vibrating Pad

The Vibrating Pad can be used under a pillow or cushion to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

  • 100mm diameter vibrating pad
  • 1.5 metre lead with locking jack plug
  • Supplied with single gang wall plate & jack socket
  • Triggered automatically by a call to an Advent xt intercom
  • Connects to Strobe Light or separate interface board
  • Vibrating Pad Part No. W00360
  • Optional interface (if used without strobe) Part No. A00452
  • Compatible with Advent XT systems only

Altec 169 Mhz Temp Extreme Sensor

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

  • Solid state temperature sensing element
  • Lower alarm temperature: 5 degrees C for 30 minutes
  • Upper alarm temperature: 30 degrees C for 5 minutes
  • Rate of rise alarm temperature: 8 degrees C per minute
  • 3 years battery life (typical) - user replaceable 3.6V Lithium
  • Daily battery self test & low battery reporting
  • Dimensions: 84 x 84 x 36 mm (HxWxD)
  • Temperature Extreme Sensor Part No. ZXT426
  • Compatible with SayPhone, Advent xt & Altec Response

£99.52

Double Adaptor

The Double Adapter can be used to connect 2 Bed Sensors (i.e. in a double bed) or 2 Pressure Mats/Door Contacts to a single Sensor Controller.

Features Include

  • Fully connected RJ45 splitter
  • Simple plug-in connection
  • Double Adapter Part No. P10285
  • Compatible with Tynetec Sensor Controller

£14.48

PIR Movement Detector

PIR Movement Detectors should be wall mounted at high level in the hallway or living room to monitor movement within the dwelling. PIR's can be used for activity monitoring or intruder detection;

Activity Mode; if no movement is detected within a preset period an "inactivity" alarm call will be transmitted.

Intruder Mode; if movement is detected an "intruder" alarm call will be transmitted.

Features include

  • Passive Infra Red sensor
  • Walk Test LED indicator
  • 2 minute signal time mask to prolong battery life
  • Pet Alley option to prevent false calls from pets
  • 1 year battery life (typical with 9V Lithium battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 114 x 70 x 76 mm (HxWxD)
  • PIR Movement Detector Part No. ZXT425
  • Compatible with SayPhone and Advent xt systems

£73.08

Sensor Controller

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

  • 7 day time clock with battery back-up
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute time-out options
  • Multifunction pushbutton and Status LED indicator
  • Test Mode to simplify set-up
  • Supplied with battery and 240V AC adaptor
  • 6 months battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 35 x 85 x 170 mm (HxWxD)
  • Sensor Controller Part No. ZXT430
  • Compatible with SayPhone, Advent xt & Altec Response

£174.78

More...

Send to Friend

: *
: *
: *
Type the letters you see in the picture:
Captcha

*