The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. 
    
 

Altec 169Mhz Carbon Monoxide Detector

Altec 169Mhz Carbon Monoxide Detector

Share
Our Price £140.91
Reward Points 704
Quantity

Manufacturer Tynetec

Description

Carbon Monoxide Detectors should be wall mounted above door height in rooms that contain a fuel burning appliance. Do not fit in bathrooms, directly above cookers or in draughty areas. If a dangerous level of carbon monoxide is detected a local alarm will sound and an alarm call will be transmitted.

Features include

  • Electrochemical Cell sensor
  • 85 dB sounder, power, fault & alarm LED indicators
  • Test/Hush button
  • Monthly self test & fault warning feature
  • 5 years detector life (inc battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 145 x 80 x 50 mm (HxWxD)
  • Complies with BS EN 50291: 2001
  • Carbon Monoxide Detector Part No. ZXT422
  • Compatible with SayPhone, Advent xt & Altec Response

Related Products...

Enuresis Sensor

The Enuresis Sensor comprises of a Bed Mat and an Interface Unit. The Bed Mat should be placed between the bottom sheet and the mattress with the cable plugged into the Interface Unit. If moisture is detected in the bed an alarm call will be transmitted.

Features include

  • Foil embossed plastic bed mat
  • 2.2 metre lead with locking plug-in connector
  • Activated LED indicator
  • 3 Years battery life (typical)
  • Daily battery self test & low battery reporting
  • Interface dimensions: 90 x 65 x 28 mm (HxWxD)
  • Bed Mat dimensions: 540 x 420 mm
  • Enuresis Sensor Part No. ZXT431(inc interface and 5 bed mats)
  • Spare Bed Mats Part No. E00550 (pack of 5)
  • Compatible with SayPhone, Advent xt & Altec Response

£163.03

Altec 169Mhz Big Button

The Big Button switch is a free-standing unit which can be placed on a tabletop within reach of the user. An emergency alarm call can be made by pressing the button. Simply rotate the cover to increase or decrease the actuation pressure.

Features include

  • Large momentary action pushbutton
  • djustable actuation pressure (from 200g to 1.5Kg)
  • 15 preset positions
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 130mm diameter x 40mm high
  • Weight: 250 grams
  • Range: 75 metres (typical)
  • Big Button Callpoint Part No. ZXT439
  • Compatible with SayPhone, Advent xt & Altec Response

£88.17

Altec 169Mhz Fall Detector

Not only can it automatically detect a fall but it can also be used to detect stumbles, trips or recovered falls. If a fall is detected the unit will enter a pre-alarm state indicated by fast beeps and a green flashing LED. If the unit is not returned to the vertical position during the pre-alarm period, an emergency alarm call will be made via an At Home Alarm Unit or Advent xt Grouped System. This results in a flashing red LED on the fall detector.

Where a stumble or a trip is detected, the unit logs this information to either a SayPhone 21 At Home Alarm unit or an Advent xt Grouped System. The data can then be accessed and analysed using Tynetec's Altera Care Software. This can then be used to look for early intervention opportunities that can ultimately lead to a reduction in emergency hospital admissions.

A normal alarm call can be made at any time by pressing the red button.

Features include

  • Solid state dual axis accelerometer sensor
  • 5 user selectable levels of sensitivity
  • 3 event logs; impacts, pre-alarms & alarms
  • 1 year battery life (typical) - user replaceable 3.6V Lithium
  • Daily battery self test & low battery reporting
  • Dimensions: 85 x 56 x 20 mm (H x W x D)
  • Weight: 68 grams
  • Range: 75 metres (typical)
  • Fall Detector Part No. ZXT410
  • Optional Elasticated Belt Part No. YW9946
  • Compatible with SayPhone, Advent xt & Altec Response

£120.38

Altec 169Mhz Pullcord

Ceiling Pullcord switches can be fitted in bathrooms, alongside the bed or anywhere Personal Pendants are not usually worn. An alarm call is made by simply pulling the cord once. The cord is long enough to reach floor level. Pullcord switches are available as radio or hardwired.

Features include

  • 2.7 metre orange nylon cord
  • 2 triangular orange grips
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 85mm diameter x 40 mm deep
  • Radio Pullcord Part No. ZXT435
  • Standard Hardwired Pullcord Part No. S00510
  • Compatible with SayPhone, Advent xt & Altec Response

£78.55

Altec 169Mhz Heat Detector

Heat Detectors should be ceiling mounted in kitchens or areas with high levels of fumes or dust, they are not suitable for bathrooms or areas of high humidity. When activated a local alarm will sound and an alarm call will be transmitted. The Control Centre or Local Manager can speak with the resident and assess the risk before contacting the Emergency Services.

Features include

  • Fast responding Thermistor sensor
  • 85 dB sounder
  • Test Button and status LED indicator
  • 1 year battery life (typical) - user replaceable 9V PP3
  • Daily battery self test & low battery reporting
  • Dimensions: 120 x 135 x 55 mm (HxWxD)
  • Complies with BS 415: 1990
  • Heat Detector Part No. ZXT421
  • Compatible with SayPhone, Advent xt & Altec Response

£100.71

Chair Sensor

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

  • Chair sensor dimensions: 325 x 130 mm
  • 1.5 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per chair
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-chair timeout options
  • Chair Sensor Part No. ZCS859
  • Compatible with Tynetec Sensor Controller

£259.82

Altec 169 Mhz Combined Gas & Carbon Monoxide Detector

Combined Gas & Carbon Monoxide Detectors should be wall mounted above door height in all rooms that contain a fuel burning appliance. Do not fit in bathrooms, directly above cookers or in draughty areas. If a dangerous level of gas or carbon monoxide is detected a local alarm will sound and an alarm call will be transmitted.

Features include

  • Gas - Nemoto Catalytic sensor
  • CO - Electrochemical Cell sensor
  • 85 dB sounder, power, fault, gas & CO alarm LED indicators
  • Requires 240V AC mains supply via a fused spur
  • 1 Watt power consumption
  • 5 years detector life (inc transmitter battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 150 x 115 x 53 mm (HxWxD)
  • Combined Gas & CO Detector Part No. ZXT427

£264.65

Bed Sensor

The Bed Sensor should be positioned across the width of the bed between the mattress and the base. Monitoring periods are set on the Sensor Controller. If the person gets into bed, then gets out again and does not return within the preset time an alarm call will be transmitted. A bedside lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-bed" and "out-of-bed" activity is transmitted and logged.

Features include

  • Bed sensor dimensions: 650 x 130 mm
  • 2 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per bed
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-bed timeout options
  • Bed Sensor Part No. ZCS844
  • Compatible with Tynetec Sensor Controller

£279.02

Sensor Controller

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

  • 7 day time clock with battery back-up
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute time-out options
  • Multifunction pushbutton and Status LED indicator
  • Test Mode to simplify set-up
  • Supplied with battery and 240V AC adaptor
  • 6 months battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 35 x 85 x 170 mm (HxWxD)
  • Sensor Controller Part No. ZXT430
  • Compatible with SayPhone, Advent xt & Altec Response

£174.78

More...

Send to Friend

: *
: *
: *
Type the letters you see in the picture:
Captcha

*