Altec 169Mhz Heat Detector

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

• 7 day time clock with battery back-up
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute time-out options
• Multifunction pushbutton and Status LED indicator
• Test Mode to simplify set-up
• Supplied with battery and 240V AC adaptor
• 6 months battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 35 x 85 x 170 mm (HxWxD)
• Sensor Controller Part No. ZXT430
• Compatible with SayPhone, Advent xt & Altec Response

The Vibrating Pad can be used under a pillow or cushion to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

• 100mm diameter vibrating pad
• 1.5 metre lead with locking jack plug
• Supplied with single gang wall plate & jack socket
• Triggered automatically by a call to an Advent xt intercom
• Connects to Strobe Light or separate interface board
• Vibrating Pad Part No. W00360
• Optional interface (if used without strobe) Part No. A00452
• Compatible with Advent XT systems only

The Big Button switch is a free-standing unit which can be placed on a tabletop within reach of the user. An emergency alarm call can be made by pressing the button. Simply rotate the cover to increase or decrease the actuation pressure.

Features include

• Large momentary action pushbutton
• djustable actuation pressure (from 200g to 1.5Kg)
• 15 preset positions
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 130mm diameter x 40mm high
• Weight: 250 grams
• Range: 75 metres (typical)
• Big Button Callpoint Part No. ZXT439
• Compatible with SayPhone, Advent xt & Altec Response

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

• Solid state temperature sensing element
• Lower alarm temperature: 5 degrees C for 30 minutes
• Upper alarm temperature: 30 degrees C for 5 minutes
• Rate of rise alarm temperature: 8 degrees C per minute
• 3 years battery life (typical) - user replaceable 3.6V Lithium
• Daily battery self test & low battery reporting
• Dimensions: 84 x 84 x 36 mm (HxWxD)
• Temperature Extreme Sensor Part No. ZXT426
• Compatible with SayPhone, Advent xt & Altec Response

The Bed Sensor should be positioned across the width of the bed between the mattress and the base. Monitoring periods are set on the Sensor Controller. If the person gets into bed, then gets out again and does not return within the preset time an alarm call will be transmitted. A bedside lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-bed" and "out-of-bed" activity is transmitted and logged.

Features include

• Bed sensor dimensions: 650 x 130 mm
• 2 metre lead with locking plug-in connector
• Double adapter available for 2 sensors per bed
• 4 levels of sensitivity with auto-calibration
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute out-of-bed timeout options
• Bed Sensor Part No. ZCS844
• Compatible with Tynetec Sensor Controller

The Door Contacts can be used to monitor any controlled door. If the door is opened with the keyswitch in the "Normal" position an alarm call will be transmitted. If the door needs to be opened for a genuine reason the keyswitch can be turned to the "Override" position.

Features include

• Surface mount single gang pattress
• 2 position Keyswitch (2 keys supplied)
• Key removable in both positions
• N/O surface mount door contacts supplied
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 87 x 87 x 40 mm (HxWxD)
• Door Alarm & Keyswitch Part No. ZXT438
• Compatible with SayPhone, Advent xt & Altec Response

The Keypad should be wall mounted within the dwelling with the contacts wired to the door and the mains adapter plugged into a 13A socket. Before the Carer leaves they enter a code to start the exit time period. When the exit time period expires the door is armed. When the door is opened the entry time period starts. If the code is not entered within the entry time an alarm call will be transmitted.

Features include

• Programmable 4 digit arm/disarm code
• Programmable entry & exit times
• Integral entry/exit sounder
• Instant alarm zone option
• Flip-cover & illuminated keypad
• Test facility
• Supplied with mains adapter & door contacts
• 5 years transmitter battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 135 x 90 x 27 mm (HxWxD)
• Wandering Alarm Part No. ZXT433
• Compatible with SayPhone, Advent xt & Altec Response

A flashing Strobe Light is used to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

• Wall mounted enclosure: 110mm diameter x 70mm deep
• 50mm diameter blue strobe light
• Triggered automatically by a call to an Advent xt intercom
• Flash duration: 20 seconds
• Advent xt Strobe Light Part No. ZSL045
• Compatible with Advent xt systems only

Combined Gas & Carbon Monoxide Detectors should be wall mounted above door height in all rooms that contain a fuel burning appliance. Do not fit in bathrooms, directly above cookers or in draughty areas. If a dangerous level of gas or carbon monoxide is detected a local alarm will sound and an alarm call will be transmitted.

Features include

• Gas - Nemoto Catalytic sensor
• CO - Electrochemical Cell sensor
• 85 dB sounder, power, fault, gas & CO alarm LED indicators
• Requires 240V AC mains supply via a fused spur
• 1 Watt power consumption
• 5 years detector life (inc transmitter battery)
• Daily battery self test & low battery reporting
• Dimensions: 150 x 115 x 53 mm (HxWxD)
• Combined Gas & CO Detector Part No. ZXT427