Altec 169Mhz Panic Button

The Door Contacts can be used to monitor any controlled door. If the door is opened with the keyswitch in the "Normal" position an alarm call will be transmitted. If the door needs to be opened for a genuine reason the keyswitch can be turned to the "Override" position.

Features include

• Surface mount single gang pattress
• 2 position Keyswitch (2 keys supplied)
• Key removable in both positions
• N/O surface mount door contacts supplied
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 87 x 87 x 40 mm (HxWxD)
• Door Alarm & Keyswitch Part No. ZXT438
• Compatible with SayPhone, Advent xt & Altec Response

The Door Contacts can be used to monitor any controlled door. If the door is opened an alarm call will be transmitted immediately.

Features include

• Surface mount single gang pattress
• N/O surface mount door contacts supplied
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: : 87 x 87 x 40 mm (HxWxD)
• Door Contacts Part No. ZXT434
• Compatible with SayPhone, Advent xt & Altec Response

Ceiling Pullcord switches can be fitted in bathrooms, alongside the bed or anywhere Personal Pendants are not usually worn. An alarm call is made by simply pulling the cord once. The cord is long enough to reach floor level. Pullcord switches are available as radio or hardwired.

Features include

• 2.7 metre orange nylon cord
• 2 triangular orange grips
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 85mm diameter x 40 mm deep
• Radio Pullcord Part No. ZXT435
• Standard Hardwired Pullcord Part No. S00510
• Compatible with SayPhone, Advent xt & Altec Response

PIR Movement Detectors should be wall mounted at high level in the hallway or living room to monitor movement within the dwelling. PIR's can be used for activity monitoring or intruder detection;

Activity Mode; if no movement is detected within a preset period an "inactivity" alarm call will be transmitted.

Intruder Mode; if movement is detected an "intruder" alarm call will be transmitted.

Features include

• Passive Infra Red sensor
• Walk Test LED indicator
• 2 minute signal time mask to prolong battery life
• Pet Alley option to prevent false calls from pets
• 1 year battery life (typical with 9V Lithium battery)
• Daily battery self test & low battery reporting
• Dimensions: 114 x 70 x 76 mm (HxWxD)
• PIR Movement Detector Part No. ZXT425
• Compatible with SayPhone and Advent xt systems

The Double Adapter can be used to connect 2 Bed Sensors (i.e. in a double bed) or 2 Pressure Mats/Door Contacts to a single Sensor Controller.

Features Include

• Fully connected RJ45 splitter
• Simple plug-in connection
• Double Adapter Part No. P10285
• Compatible with Tynetec Sensor Controller

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

• Chair sensor dimensions: 325 x 130 mm
• 1.5 metre lead with locking plug-in connector
• Double adapter available for 2 sensors per chair
• 4 levels of sensitivity with auto-calibration
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute out-of-chair timeout options
• Chair Sensor Part No. ZCS859
• Compatible with Tynetec Sensor Controller

Flood Detectors should be located on the floor below the bath, wash basin or kitchen sink or anywhere a tap could be left running. Flood Detectors can be free standing or screw fixed to the skirting board with an optional mounting bracket. If a flood is detected an alarm call will be transmitted.

Features include

• Moisture Bridge Sensor
• Activated LED indicator
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 50 x 95 x 18 mm (HxWxD)
• Flood Detector Part No. ZXT424
• Optional Mounting Bracket Part No. V00770
• Compatible with SayPhone, Advent xt & Altec Response

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

• 7 day time clock with battery back-up
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute time-out options
• Multifunction pushbutton and Status LED indicator
• Test Mode to simplify set-up
• Supplied with battery and 240V AC adaptor
• 6 months battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 35 x 85 x 170 mm (HxWxD)
• Sensor Controller Part No. ZXT430
• Compatible with SayPhone, Advent xt & Altec Response

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

• Solid state temperature sensing element
• Lower alarm temperature: 5 degrees C for 30 minutes
• Upper alarm temperature: 30 degrees C for 5 minutes
• Rate of rise alarm temperature: 8 degrees C per minute
• 3 years battery life (typical) - user replaceable 3.6V Lithium
• Daily battery self test & low battery reporting
• Dimensions: 84 x 84 x 36 mm (HxWxD)
• Temperature Extreme Sensor Part No. ZXT426
• Compatible with SayPhone, Advent xt & Altec Response