Altec 169Mhz R.N.I.D Smoke Alarm Kit

The Epilepsy Monitor bed sensor pads should be positioned under the mattress to detect arm and leg movements. If a Tonic Clonic seizure is detected in the bed an alarm call is transmitted.

Features include

• 2 under mattress sensor pads
• Sophisticated digital processor
• 3 sensitivity settings
• LED indication of sensitivity setting
• Supplied with Mains Adapter
• 5 Years Transmitter battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 125 x 69 x 24 mm (HxWxD)
• Epilepsy Monitor Part No. ZXT441
• Compatible with SayPhone, Advent xt & Altec Response

The Big Button switch is a free-standing unit which can be placed on a tabletop within reach of the user. An emergency alarm call can be made by pressing the button. Simply rotate the cover to increase or decrease the actuation pressure.

Features include

• Large momentary action pushbutton
• djustable actuation pressure (from 200g to 1.5Kg)
• 15 preset positions
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 130mm diameter x 40mm high
• Weight: 250 grams
• Range: 75 metres (typical)
• Big Button Callpoint Part No. ZXT439
• Compatible with SayPhone, Advent xt & Altec Response

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

• Chair sensor dimensions: 325 x 130 mm
• 1.5 metre lead with locking plug-in connector
• Double adapter available for 2 sensors per chair
• 4 levels of sensitivity with auto-calibration
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute out-of-chair timeout options
• Chair Sensor Part No. ZCS859
• Compatible with Tynetec Sensor Controller

The Ambient Temperature Monitor should be wall mounted in the hallway or living room away from any draughts or heat sources. When used in conjunction with a PIR, this device can be used to assess whether a client is potentially at risk from hypothermia e.g. if they are not using their central heating system at night or during winter months. The unit will generate a warning signal should the temperature drop below 16 degrees C and will activate an alarm condition should the temperature fall below 10 degrees C for 30 minutes.

Features include

• Solid state temperature sensing element
• Lower alarm temperature: 10 degrees C for 30 minutes
• Upper temperature threshold: 16 degrees C
• 3 years battery life (typical) - user replaceable 3.6V Lithium
• Daily battery self test & low battery reporting
• Dimensions: 84 x 84 x 36 mm (HxWxD)
• Ambient Temperature Monitor No. ZXT442
• Compatible with SayPhone, Advent xt & Altec Response

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

• Solid state temperature sensing element
• Lower alarm temperature: 5 degrees C for 30 minutes
• Upper alarm temperature: 30 degrees C for 5 minutes
• Rate of rise alarm temperature: 8 degrees C per minute
• 3 years battery life (typical) - user replaceable 3.6V Lithium
• Daily battery self test & low battery reporting
• Dimensions: 84 x 84 x 36 mm (HxWxD)
• Temperature Extreme Sensor Part No. ZXT426
• Compatible with SayPhone, Advent xt & Altec Response

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

• 7 day time clock with battery back-up
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute time-out options
• Multifunction pushbutton and Status LED indicator
• Test Mode to simplify set-up
• Supplied with battery and 240V AC adaptor
• 6 months battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 35 x 85 x 170 mm (HxWxD)
• Sensor Controller Part No. ZXT430
• Compatible with SayPhone, Advent xt & Altec Response

The Door Contacts can be used to monitor any controlled door. If the door is opened an alarm call will be transmitted immediately.

Features include

• Surface mount single gang pattress
• N/O surface mount door contacts supplied
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: : 87 x 87 x 40 mm (HxWxD)
• Door Contacts Part No. ZXT434
• Compatible with SayPhone, Advent xt & Altec Response

The Double Adapter can be used to connect 2 Bed Sensors (i.e. in a double bed) or 2 Pressure Mats/Door Contacts to a single Sensor Controller.

Features Include

• Fully connected RJ45 splitter
• Simple plug-in connection
• Double Adapter Part No. P10285
• Compatible with Tynetec Sensor Controller

A flashing Strobe Light is used to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

• Wall mounted enclosure: 110mm diameter x 70mm deep
• 50mm diameter blue strobe light
• Triggered automatically by a call to an Advent xt intercom
• Flash duration: 20 seconds
• Advent xt Strobe Light Part No. ZSL045
• Compatible with Advent xt systems only