Ambient Temperature Monitor

Ambient Temperature Monitor

Share
Our Price £99.52
Reward Points 497
Quantity

Manufacturer Tynetec

Description

The Ambient Temperature Monitor should be wall mounted in the hallway or living room away from any draughts or heat sources. When used in conjunction with a PIR, this device can be used to assess whether a client is potentially at risk from hypothermia e.g. if they are not using their central heating system at night or during winter months. The unit will generate a warning signal should the temperature drop below 16 degrees C and will activate an alarm condition should the temperature fall below 10 degrees C for 30 minutes.

Features include

  • Solid state temperature sensing element
  • Lower alarm temperature: 10 degrees C for 30 minutes
  • Upper temperature threshold: 16 degrees C
  • 3 years battery life (typical) - user replaceable 3.6V Lithium
  • Daily battery self test & low battery reporting
  • Dimensions: 84 x 84 x 36 mm (HxWxD)
  • Ambient Temperature Monitor No. ZXT442
  • Compatible with SayPhone, Advent xt & Altec Response

Related Products...

Chair Sensor

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

  • Chair sensor dimensions: 325 x 130 mm
  • 1.5 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per chair
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-chair timeout options
  • Chair Sensor Part No. ZCS859
  • Compatible with Tynetec Sensor Controller

£259.82

Sensor Controller

The Sensor Controller can be used with a Bed Sensor, Chair Sensor, Pressure Mat or Door Contact. If a person gets into bed/sits in their chair, then gets up again and does not return within the preset time an alarm call will be transmitted. With the pressure mat/door contact an alarm will be transmitted 1 minute after the sensor is activated unless cancelled locally. Lamps etc. can be turned on/off automatically using a Remote Controlled Mains Switcher Kit.

Features include

  • 7 day time clock with battery back-up
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute time-out options
  • Multifunction pushbutton and Status LED indicator
  • Test Mode to simplify set-up
  • Supplied with battery and 240V AC adaptor
  • 6 months battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 35 x 85 x 170 mm (HxWxD)
  • Sensor Controller Part No. ZXT430
  • Compatible with SayPhone, Advent xt & Altec Response

£174.78

Altec 169Mhz Carbon Monoxide Detector

Carbon Monoxide Detectors should be wall mounted above door height in rooms that contain a fuel burning appliance. Do not fit in bathrooms, directly above cookers or in draughty areas. If a dangerous level of carbon monoxide is detected a local alarm will sound and an alarm call will be transmitted.

Features include

  • Electrochemical Cell sensor
  • 85 dB sounder, power, fault & alarm LED indicators
  • Test/Hush button
  • Monthly self test & fault warning feature
  • 5 years detector life (inc battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 145 x 80 x 50 mm (HxWxD)
  • Complies with BS EN 50291: 2001
  • Carbon Monoxide Detector Part No. ZXT422
  • Compatible with SayPhone, Advent xt & Altec Response

£140.91

Altec 169 Mhz Temp Extreme Sensor

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

  • Solid state temperature sensing element
  • Lower alarm temperature: 5 degrees C for 30 minutes
  • Upper alarm temperature: 30 degrees C for 5 minutes
  • Rate of rise alarm temperature: 8 degrees C per minute
  • 3 years battery life (typical) - user replaceable 3.6V Lithium
  • Daily battery self test & low battery reporting
  • Dimensions: 84 x 84 x 36 mm (HxWxD)
  • Temperature Extreme Sensor Part No. ZXT426
  • Compatible with SayPhone, Advent xt & Altec Response

£99.52

Vibrating Pad

The Vibrating Pad can be used under a pillow or cushion to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

  • 100mm diameter vibrating pad
  • 1.5 metre lead with locking jack plug
  • Supplied with single gang wall plate & jack socket
  • Triggered automatically by a call to an Advent xt intercom
  • Connects to Strobe Light or separate interface board
  • Vibrating Pad Part No. W00360
  • Optional interface (if used without strobe) Part No. A00452
  • Compatible with Advent XT systems only

Door Contact

The Door Contacts can be used to monitor any controlled door. If the door is opened with the keyswitch in the "Normal" position an alarm call will be transmitted. If the door needs to be opened for a genuine reason the keyswitch can be turned to the "Override" position.

Features include

  • Surface mount single gang pattress
  • 2 position Keyswitch (2 keys supplied)
  • Key removable in both positions
  • N/O surface mount door contacts supplied
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 87 x 87 x 40 mm (HxWxD)
  • Door Alarm & Keyswitch Part No. ZXT438
  • Compatible with SayPhone, Advent xt & Altec Response

£59.32

Altec 169Mhz Heat Detector

Heat Detectors should be ceiling mounted in kitchens or areas with high levels of fumes or dust, they are not suitable for bathrooms or areas of high humidity. When activated a local alarm will sound and an alarm call will be transmitted. The Control Centre or Local Manager can speak with the resident and assess the risk before contacting the Emergency Services.

Features include

  • Fast responding Thermistor sensor
  • 85 dB sounder
  • Test Button and status LED indicator
  • 1 year battery life (typical) - user replaceable 9V PP3
  • Daily battery self test & low battery reporting
  • Dimensions: 120 x 135 x 55 mm (HxWxD)
  • Complies with BS 415: 1990
  • Heat Detector Part No. ZXT421
  • Compatible with SayPhone, Advent xt & Altec Response

£100.71

Radio Door Contact

The Door Contacts can be used to monitor any controlled door. If the door is opened an alarm call will be transmitted immediately.

Features include

  • Surface mount single gang pattress
  • N/O surface mount door contacts supplied
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: : 87 x 87 x 40 mm (HxWxD)
  • Door Contacts Part No. ZXT434
  • Compatible with SayPhone, Advent xt & Altec Response

Epilespy Monitor

The Epilepsy Monitor bed sensor pads should be positioned under the mattress to detect arm and leg movements. If a Tonic Clonic seizure is detected in the bed an alarm call is transmitted.

Features include

  • 2 under mattress sensor pads
  • Sophisticated digital processor
  • 3 sensitivity settings
  • LED indication of sensitivity setting
  • Supplied with Mains Adapter
  • 5 Years Transmitter battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 125 x 69 x 24 mm (HxWxD)
  • Epilepsy Monitor Part No. ZXT441
  • Compatible with SayPhone, Advent xt & Altec Response

More...

Send to Friend

: *
: *
: *
Type the letters you see in the picture:
Captcha

*