Double Adaptor

Heat Detectors should be ceiling mounted in kitchens or areas with high levels of fumes or dust, they are not suitable for bathrooms or areas of high humidity. When activated a local alarm will sound and an alarm call will be transmitted. The Control Centre or Local Manager can speak with the resident and assess the risk before contacting the Emergency Services.

Features include

• Fast responding Thermistor sensor
• 85 dB sounder
• Test Button and status LED indicator
• 1 year battery life (typical) - user replaceable 9V PP3
• Daily battery self test & low battery reporting
• Dimensions: 120 x 135 x 55 mm (HxWxD)
• Complies with BS 415: 1990
• Heat Detector Part No. ZXT421
• Compatible with SayPhone, Advent xt & Altec Response

Ceiling Pullcord switches can be fitted in bathrooms, alongside the bed or anywhere Personal Pendants are not usually worn. An alarm call is made by simply pulling the cord once. The cord is long enough to reach floor level. Pullcord switches are available as radio or hardwired.

Features include

• 2.7 metre orange nylon cord
• 2 triangular orange grips
• 5 years battery life (typical)
• Daily battery self test & low battery reporting
• Dimensions: 85mm diameter x 40 mm deep
• Radio Pullcord Part No. ZXT435
• Standard Hardwired Pullcord Part No. S00510
• Compatible with SayPhone, Advent xt & Altec Response

The Temperature Extreme Sensor should be wall mounted in the hallway or living room away from any draughts or heat sources. This will provide early warning of extreme low or high household temperatures which could result in the occupier suffering hypothermia or dehydration. In addition, the building will also be protected against burst pipes or potential fire hazards.

Features include

• Solid state temperature sensing element
• Lower alarm temperature: 5 degrees C for 30 minutes
• Upper alarm temperature: 30 degrees C for 5 minutes
• Rate of rise alarm temperature: 8 degrees C per minute
• 3 years battery life (typical) - user replaceable 3.6V Lithium
• Daily battery self test & low battery reporting
• Dimensions: 84 x 84 x 36 mm (HxWxD)
• Temperature Extreme Sensor Part No. ZXT426
• Compatible with SayPhone, Advent xt & Altec Response

The Vibrating Pad can be used under a pillow or cushion to alert hard of hearing residents when the Local Manager or Control Centre is trying to contact them.

Features include

• 100mm diameter vibrating pad
• 1.5 metre lead with locking jack plug
• Supplied with single gang wall plate & jack socket
• Triggered automatically by a call to an Advent xt intercom
• Connects to Strobe Light or separate interface board
• Vibrating Pad Part No. W00360
• Optional interface (if used without strobe) Part No. A00452
• Compatible with Advent XT systems only

PIR Movement Detectors should be wall mounted at high level in the hallway or living room to monitor movement within the dwelling. PIR's can be used for activity monitoring or intruder detection;

Activity Mode; if no movement is detected within a preset period an "inactivity" alarm call will be transmitted.

Intruder Mode; if movement is detected an "intruder" alarm call will be transmitted.

Features include

• Passive Infra Red sensor
• Walk Test LED indicator
• 2 minute signal time mask to prolong battery life
• Pet Alley option to prevent false calls from pets
• 1 year battery life (typical with 9V Lithium battery)
• Daily battery self test & low battery reporting
• Dimensions: 114 x 70 x 76 mm (HxWxD)
• PIR Movement Detector Part No. ZXT425
• Compatible with SayPhone and Advent xt systems

The R.N.I.D. Smoke Alarm Kit is designed exclusively for deaf and hard of hearing people. If a fire is detected the Smoke Alarm sounds, the Strobe Light flashes, the Pillow Pad vibrates and an alarm call is transmitted. The Control Centre or Local manager can assess the risk before contacting the Emergency Services.

Features include

• Optical smoke detector with integral sounder
• Table/wall mount unit with integral strobe
• 100mm diameter vibrating pillow pad
• Fault monitoring with LED status indication and Test button
• Plug-in mains adapter with 100 hours battery standby
• 5 years Transmitter battery life (typical)
• Daily battery self test & low battery reporting
• Complies with BS5446-3:2005
• R.N.I.D. Smoke Alarm Kit Part No. ZXT437
• Compatible with SayPhone, Advent xt & Altec Response

The Pill Dispenser will sound an alarm when it is time for the user to take their medication - if the pills are not taken from the dispenser within a preset period an alarm call will be transmitted. The Pill Dispenser will make the correct dosage available at the correct time each day whilst keeping the others locked out of sight.Pills "ready" and pills "taken" times are also transmitted and logged

Features include

• 1 to 28 day capacity - 1 to 28 doses per day
• Lockable lid (supplied with 2 keys)
• LCD display and easy to navigate programming menus
• Audible alarm & flashing LED when pills "ready"
• Self Test mode for easy registration
• 12 months battery life (typical)
• 4 user replaceable AA batteries
• Daily battery self test & low battery reporting
• Dimensions: 180mm diameter x 50mm deep
• Weight: 480 grams (empty)
• Pill Dispenser Part No. ZXT432
• Spare Cassette Part No. W00359
• Compatible with SayPhone, Advent xt & Altec Response

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

• Chair sensor dimensions: 325 x 130 mm
• 1.5 metre lead with locking plug-in connector
• Double adapter available for 2 sensors per chair
• 4 levels of sensitivity with auto-calibration
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute out-of-chair timeout options
• Chair Sensor Part No. ZCS859
• Compatible with Tynetec Sensor Controller

The Bed Sensor should be positioned across the width of the bed between the mattress and the base. Monitoring periods are set on the Sensor Controller. If the person gets into bed, then gets out again and does not return within the preset time an alarm call will be transmitted. A bedside lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-bed" and "out-of-bed" activity is transmitted and logged.

Features include

• Bed sensor dimensions: 650 x 130 mm
• 2 metre lead with locking plug-in connector
• Double adapter available for 2 sensors per bed
• 4 levels of sensitivity with auto-calibration
• Up to 6 monitoring periods per day
• 10, 20 or 50 minute out-of-bed timeout options
• Bed Sensor Part No. ZCS844
• Compatible with Tynetec Sensor Controller