The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. 
    
 

Enuresis Sensor

Enuresis Sensor

Share
Our Price £163.03
Reward Points 815
Quantity

Manufacturer Tynetec

Description

The Enuresis Sensor comprises of a Bed Mat and an Interface Unit. The Bed Mat should be placed between the bottom sheet and the mattress with the cable plugged into the Interface Unit. If moisture is detected in the bed an alarm call will be transmitted.

Features include

  • Foil embossed plastic bed mat
  • 2.2 metre lead with locking plug-in connector
  • Activated LED indicator
  • 3 Years battery life (typical)
  • Daily battery self test & low battery reporting
  • Interface dimensions: 90 x 65 x 28 mm (HxWxD)
  • Bed Mat dimensions: 540 x 420 mm
  • Enuresis Sensor Part No. ZXT431(inc interface and 5 bed mats)
  • Spare Bed Mats Part No. E00550 (pack of 5)
  • Compatible with SayPhone, Advent xt & Altec Response

Related Products...

Altec 169 Mhz Combined Gas & Carbon Monoxide Detector

Combined Gas & Carbon Monoxide Detectors should be wall mounted above door height in all rooms that contain a fuel burning appliance. Do not fit in bathrooms, directly above cookers or in draughty areas. If a dangerous level of gas or carbon monoxide is detected a local alarm will sound and an alarm call will be transmitted.

Features include

  • Gas - Nemoto Catalytic sensor
  • CO - Electrochemical Cell sensor
  • 85 dB sounder, power, fault, gas & CO alarm LED indicators
  • Requires 240V AC mains supply via a fused spur
  • 1 Watt power consumption
  • 5 years detector life (inc transmitter battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 150 x 115 x 53 mm (HxWxD)
  • Combined Gas & CO Detector Part No. ZXT427

£264.65

Chair Sensor

The Chair Sensor should be positioned under the seat cushion, monitoring periods are set on the Sensor Controller. If a person sits down, then gets up again and does not return within the preset time an alarm call will be transmitted. A table lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-chair" and "out-of-chair" activity is transmitted and logged.

Features include

  • Chair sensor dimensions: 325 x 130 mm
  • 1.5 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per chair
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-chair timeout options
  • Chair Sensor Part No. ZCS859
  • Compatible with Tynetec Sensor Controller

£259.82

Altec 169Mhz Panic Button

The Bogus Caller Button is usually wall mounted in the hallway alongside the front door where it can easily be pressed if the resident feels threatened or uneasy with a visitor. When used with the SayPhone 21 it will initiate a "silent" alarm call to the Control Centre, when used with the Advent xt it will initiate an "attack" alarm call having priority over any other call in progress.

Features include

  • Momentary action pushbutton
  • Single gang pattress & surface backbox
  • Discreet - looks like a normal light switch
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 87 x 87 x 40 mm (HxWxD)
  • Bogus Caller/Panic Button Part No. ZXT436
  • Compatible with SayPhone, Advent xt & Altec Response

£57.15

Bed Sensor

The Bed Sensor should be positioned across the width of the bed between the mattress and the base. Monitoring periods are set on the Sensor Controller. If the person gets into bed, then gets out again and does not return within the preset time an alarm call will be transmitted. A bedside lamp can be turned on/off automatically using a Remote Controlled Mains Switcher Kit. All "in-bed" and "out-of-bed" activity is transmitted and logged.

Features include

  • Bed sensor dimensions: 650 x 130 mm
  • 2 metre lead with locking plug-in connector
  • Double adapter available for 2 sensors per bed
  • 4 levels of sensitivity with auto-calibration
  • Up to 6 monitoring periods per day
  • 10, 20 or 50 minute out-of-bed timeout options
  • Bed Sensor Part No. ZCS844
  • Compatible with Tynetec Sensor Controller

£279.02

PIR Movement Detector

PIR Movement Detectors should be wall mounted at high level in the hallway or living room to monitor movement within the dwelling. PIR's can be used for activity monitoring or intruder detection;

Activity Mode; if no movement is detected within a preset period an "inactivity" alarm call will be transmitted.

Intruder Mode; if movement is detected an "intruder" alarm call will be transmitted.

Features include

  • Passive Infra Red sensor
  • Walk Test LED indicator
  • 2 minute signal time mask to prolong battery life
  • Pet Alley option to prevent false calls from pets
  • 1 year battery life (typical with 9V Lithium battery)
  • Daily battery self test & low battery reporting
  • Dimensions: 114 x 70 x 76 mm (HxWxD)
  • PIR Movement Detector Part No. ZXT425
  • Compatible with SayPhone and Advent xt systems

£73.08

Wander Alarm

The Keypad should be wall mounted within the dwelling with the contacts wired to the door and the mains adapter plugged into a 13A socket. Before the Carer leaves they enter a code to start the exit time period. When the exit time period expires the door is armed. When the door is opened the entry time period starts. If the code is not entered within the entry time an alarm call will be transmitted.

Features include

  • Programmable 4 digit arm/disarm code
  • Programmable entry & exit times
  • Integral entry/exit sounder
  • Instant alarm zone option
  • Flip-cover & illuminated keypad
  • Test facility
  • Supplied with mains adapter & door contacts
  • 5 years transmitter battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 135 x 90 x 27 mm (HxWxD)
  • Wandering Alarm Part No. ZXT433
  • Compatible with SayPhone, Advent xt & Altec Response

Altec 169Mhz Pill Dispenser

The Pill Dispenser will sound an alarm when it is time for the user to take their medication - if the pills are not taken from the dispenser within a preset period an alarm call will be transmitted. The Pill Dispenser will make the correct dosage available at the correct time each day whilst keeping the others locked out of sight.Pills "ready" and pills "taken" times are also transmitted and logged

Features include

  • 1 to 28 day capacity - 1 to 28 doses per day
  • Lockable lid (supplied with 2 keys)
  • LCD display and easy to navigate programming menus
  • Audible alarm & flashing LED when pills "ready"
  • Self Test mode for easy registration
  • 12 months battery life (typical)
  • 4 user replaceable AA batteries
  • Daily battery self test & low battery reporting
  • Dimensions: 180mm diameter x 50mm deep
  • Weight: 480 grams (empty)
  • Pill Dispenser Part No. ZXT432
  • Spare Cassette Part No. W00359
  • Compatible with SayPhone, Advent xt & Altec Response

£277.11

Door Contact

The Door Contacts can be used to monitor any controlled door. If the door is opened with the keyswitch in the "Normal" position an alarm call will be transmitted. If the door needs to be opened for a genuine reason the keyswitch can be turned to the "Override" position.

Features include

  • Surface mount single gang pattress
  • 2 position Keyswitch (2 keys supplied)
  • Key removable in both positions
  • N/O surface mount door contacts supplied
  • 5 years battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 87 x 87 x 40 mm (HxWxD)
  • Door Alarm & Keyswitch Part No. ZXT438
  • Compatible with SayPhone, Advent xt & Altec Response

£59.32

Epilespy Monitor

The Epilepsy Monitor bed sensor pads should be positioned under the mattress to detect arm and leg movements. If a Tonic Clonic seizure is detected in the bed an alarm call is transmitted.

Features include

  • 2 under mattress sensor pads
  • Sophisticated digital processor
  • 3 sensitivity settings
  • LED indication of sensitivity setting
  • Supplied with Mains Adapter
  • 5 Years Transmitter battery life (typical)
  • Daily battery self test & low battery reporting
  • Dimensions: 125 x 69 x 24 mm (HxWxD)
  • Epilepsy Monitor Part No. ZXT441
  • Compatible with SayPhone, Advent xt & Altec Response

More...

Send to Friend

: *
: *
: *
Type the letters you see in the picture:
Captcha

*