New Products

Intercall Touch Series - Touch Room Controller

Intercall Touch Series - Wearable Call Point Programmer

Intercall Touch Series - RFID Card Programmer

Intercall Touch Series - Touch Isolator

Intercall Touch Series - Touch Controller

The remote bed and chair sensor unit connects to your Intercall bedroom call unit as shown *

The unit comes with a mains power adaptor to save battery life.

The sensor mats are placed under the mattress and under the resident’s chair seat. There are no hazardous connecting cables.

If the resident leaves the chair or the bed your Nursecall system will operate.

Other kits are available - click here to view

* The Intercall call unit is shown for illustrative purposes and not included in the kit

The remote bed sensor unit connects to your Intercall bedroom call unit as shown *

The unit comes with a mains power adaptor to save battery life.

The sensor mat is placed under the residents mattress. There are no hazardous connecting cables.

If the resident leaves their bed your Nursecall will operate.

Other kits are available - click here to view

* The Intercall call unit is shown for illustrative purposes and not included in the kit

The remote bedroom chair sensor unit connects to your Intercall bedroom call unit as shown *

The unit comes with a mains power adaptor to save battery life.

The sensor mat is placed upon the residents seat. There are no hazardous connecting cables.

If the resident leaves their chair your Nursecall will operate.

Other kits are available - click here to view

* The Intercall call unit is shown for illustrative purposes and not included in the kit

The chair monitor unit is connected to your Intercall lounge call unit as shown *

The remote chair mat is placed upon the resident’s seat. There are no hazardous connecting cables.

If the resident leaves the chair your Nursecall system will activate.

Each chair monitor unit can accommodate up to 6 chair mats.

Additional chair mats are available at £80.00 + vat.

Other kits are available - click here to view

* The Intercall call unit is shown for illustrative purposes and not included in the kit

Epilepsy seizure monitoring bed sensor which connects to your Intercall 600 or 700 nursecall system. Device comes with Nursecall connection lead, mains power adaptor and full set up instructions.

The Safeguard point is used to control the monitoring functions within a bedroom. Its sleek wall mounted design allows this unit to be positioned either side of a bedroom door for simple staff operation.

The Safeguard sensor monitors rooms where the resident is prone to falling or wandering at night. Positioned on the ceiling the Safeguard sensor passively monitors bed occupancy using thermal imaging detection to provide accurate motion readings.

The portable transmitter provides a simple connection to assistive technology devices. It pairs wirelessly with the call system and can be individually programmed to raise the appropriate alert.

Care management teams can configure individual cards via an easy to use programmer, assigning staff ID cards with the appropriate user name and access level. Staff response and movement in the care facility are recorded, helping prove good care is happening.

Please note the pendant will not work without The Garden Call transmitter unit, and the Intercall interface which will need to be purchased separately

Wearable pendant for garden areas for use with the Garden Call Central Equipment.

This pendant is adaptable to your needs. Can be worn on wrist, neck or clipon.

Neck pendant for large garden areas for use with the Garden Call Central Equipment.

The Garden Call transmitter unit, together with the Intercall interface, allows the use of residents remote call pendants (CP1 and/or CP2) to operate within the garden area of your care home.

When a pendant is activated it will place "garden call" on the nurse call displays. Staff accept the call and attend.

Bed wetting enuresis monitor for both Intercall 600 and 700 systems.

IP470 Call Logging Interface to your Nursing Home's LAN network.

Enables any computer using your network to be able to obtan detailed call logging records.

Individual bedroom printouts and staff night visit records are easily obtained.

A real must for existing Intercall 600 and 700 users!

Full addressable staff pagers for your Intercall Nursecall System.

Price on request.

Pear Lead Clip for use on the Intercall NP2, NP4, NP 6 & NP8 call extension lead.

Lock nut replacement for Intercall call unit.

Jack Plug replacement for Intercall NP2, NP4, NP6 & NP8 call extension leads.

PLEASE NOTE THIS ITEM IS NOT COMPATABLE WITH THE 600 & 700 SYSTEMS

The Wearable Call Point is a stylish portable call device that’s ideal for both care home residents and assisted living inhabitants. Its lightweight, comfortable design allows users to get on with their day-to-day lives safe in the knowledge that help is close at hand. Based on a wristwatch design, the skin friendly silicon wristband is perfect for raising an alarm when assistance is required, wherever the user may be.

The Call Point Basic is our entry-level call point and ideal for use in most care environments, from larger hospitals to residential care homes. Its sleek, wall mounted design is simple to use. It is the perfect call assistance device for staff, patients or residents, whether positioned alongside the bed or in more general areas.

The Call Point Standard has the functionality of the Call Point Basic and much more. Like the Call Point Basic, it is ideal for use in most care environments, from larger hospitals to residential care homes. Its sleek, wall mounted design is simple to use. It is the perfect call assistance device for staff, patients or residents, whether positioned alongside the bed or in more general areas. Unlike the Call Point Basic, the Call Point Standard uses RFID technology (Radio Frequency Identification) to identify and track staff and it can be paired with our Wearable Call Point.

The Touch Series Overdoor Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Overdoor Light provides a clear visual status of an alert as well as improving awareness of the alert.

The Access Point is a simple, cost effective, wireless ID security system. Using Radio Frequency Identification technology (RFID), the Access Control Point allows hospitals and care facilities to control access to sensitive and restricted areas.

The Bathroom Pull Cord is ideal for hospitals, care homes and assisted living residences. The Pull Cord is paired to a central call point, providing the call address and reset function.

The Pear Lead is a simple, individual call device for use in care facilities for less mobile patients.

The Call Point Plus has all the functionality of our Call Point Standard, with the addition of a full duplex VoIP speech device. The Call Point Plus is ideal for use in most care environments, from larger hospitals to residential care homes and assisted living programmes. Its sleek, wall mounted design is simple to use and is the perfect call assistance device for staff, patients or residents, whether positioned behind the bed or in more general areas. The Call Point Plus allows staff, patients and residents to speak with each other through its VoIP intercom system, offering the instant reassurance of human interaction.

The Touch Display is the heart of the Intercall Touch Series. Perfect for larger hospitals or smaller care residences, the Touch Display is the central hub of the Touch Series nurse call system. Ideally installed on a desk or wall mounted, the Touch Display is the primary nurse call system staff interaction point. It helps nursing staff with monitoring while notifying them of calls and alerts on the system, allowing them to decide the most appropriate response. Single or multiple display’s can be installed, depending on the size and individual needs of the care facility.

High quality and robust portable bedroom PIR sensor, complete with five metre extension lead for nursecall connection.

Very simple to operate. Just plug into your nursecall system unit and press the silver button on the sensor before leaving the room.

Ideal for monitoring bedroom doorways.

This product is so reliable it comes with a 3 year warranty!

Note, you can add the High Quality Portable Chair Monitor.

Allows call lead and pressure mat to be connected to the same call unit.

TIR4 or TRF4 Trigger Battery Replacement x 1 - MN21

The Reach plus at-home alarm unit incorporates all of the fantastic features of the Reach unit but with the addition of a built in real time clock. This enables the unit to be used for activity monitoring across a number of timed periods. The unit can also be used as a medication reminder and accepts up to 16 user recordable messages. For the service provider who feels the need to call their clients on a daily basis, the Reach plus incorporates an I'm OK function which allows the service user to acknowledge that they don't require a call by simply pressing the green button on the unit within a pre-programmed time period. The Reach plus is also compatible with all of the latest alarm receiving centres.

Reach plus Features

• Real time clock
• Internal memory to store 10,000 events
• 3 daily activity monitoring periods
• Inactivity pre-alarm alert
• 3 daily trigger activity windows
• 16 user recordable messages
• 8 daily/weekly/monthly reminders
• I'm OK mode
• Lone worker mode
• Remote pendant learn function
• 4 hardwired inputs + 1 hardwired output
• Compatible with all the latest monitoring centres
• Supplied with 1 personal Touch Pendant in cluding wearing options
• Dimensions: 150mm x 200mm x 55mm (HxWxD)